Mittwoch Mai 22, 2013, 03:39:20
Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
Beiträge anzeigen
Diese Sektion erlaubt es ihnen alle Beiträge dieses Mitglieds zu sehen. Beachten sie, dass sie nur solche Beiträge sehen können, zu denen sie auch Zugriffsrechte haben.
Nachrichten - Chiller
1
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Montag März 05, 2012, 23:13:57 »
Removed the two Coolit pumps and replaced them with :
Swiftech MCP355
Aquacomputer top
koolance heatsink
Bitspower Z-multi red 40mm res
Temps are little lower now, higher flow.
Just need to make a nice mounting for the pump res combo (strapped for now) ,
make a fan in the bottom and finishing some stuff of cables and red acyl.
Swiftech MCP355
Aquacomputer top
koolance heatsink
Bitspower Z-multi red 40mm res
Temps are little lower now, higher flow.
Just need to make a nice mounting for the pump res combo (strapped for now) ,
make a fan in the bottom and finishing some stuff of cables and red acyl.
2
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Samstag Februar 25, 2012, 15:47:17 »
some small adjustments in rig,
so really everything is how i whant it :
this res comes in place of the top Coolit pump,
and the one under it will be changed by a koolance PMP-400 :
Bitspower Z-Multi 40mm Water Tank - Ice Red
also will ad a fan red led in bottom plate for some extra air for vga's.
ad some small red smoke acryl plates for finishing overal look when case is open to hide cables.
And then it's really finished like i whant it !
so really everything is how i whant it :
this res comes in place of the top Coolit pump,
and the one under it will be changed by a koolance PMP-400 :
Bitspower Z-Multi 40mm Water Tank - Ice Red
also will ad a fan red led in bottom plate for some extra air for vga's.
ad some small red smoke acryl plates for finishing overal look when case is open to hide cables.
And then it's really finished like i whant it !
3
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Freitag Februar 24, 2012, 19:05:21 »
4
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Mittwoch Februar 15, 2012, 07:14:17 »
little update, needs some finishing off, thirth vga adding for PhysX, bodem plate placing in, and remove dust :
5
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Samstag Februar 11, 2012, 19:33:29 »
Small update :
6
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Samstag Februar 11, 2012, 19:33:13 »
Small update :
7
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Freitag Februar 10, 2012, 15:03:35 »
Little update : Next copper bars are bended the same and almost on the good lenght, and 2 PciE connectors are almost ready to :
8
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Montag Februar 06, 2012, 18:43:20 »
update, first is allmost finished, need some detail work done, and made black, but it works like a sharm and no cables there anymore :
9
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Montag Januar 30, 2012, 12:43:48 »
gtx580 Classified backplates are in the house, the gpu's getting spoiled:
hhhmmm sexy :
hhhmmm sexy :
10
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Sonntag Januar 29, 2012, 17:52:17 »
like this the connectors will be :
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)
only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)
only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :
11
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Sonntag Januar 29, 2012, 17:52:10 »
like this the connectors will be :
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)
only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)
only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :
12
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Samstag Januar 28, 2012, 19:24:22 »
Last stuf making for vga's, making 5 more of these, cut them on lenght, other side also connectors,
isolate them, make them black :
isolate them, make them black :
13
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Mittwoch Januar 18, 2012, 07:01:23 »
There's a new baby coming to me, a Evga GTX285 Classified 1Gb vga, just for PhysX in my rig :
then i will have all Classified stuf in it :
SR-2 Classified mobo
2x GTX580 Classified for FPS
SR-2 1200w Classified Psu
and the gtx285 Classified for PhysX
then i will have all Classified stuf in it :
SR-2 Classified mobo
2x GTX580 Classified for FPS
SR-2 1200w Classified Psu
and the gtx285 Classified for PhysX
14
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Donnerstag Juli 28, 2011, 10:05:31 »
thanks
15
Modding, Casemodding, Beleuchtung / Re:Chiller's hybrid SR-2
« am: Mittwoch Juli 27, 2011, 19:09:40 »Seite erstellt in 0.041 Sekunden mit 20 Abfragen.
