Working on the case again al day, bend the alu plate, making some acryl ready,
the extra piece of hight is for the cpu power cables of the left cpu :
With the cooler on his place :
With the red acryl on his place also for the enlargement of the mobo cover :
And then as last also grey smoke like on the cpu cooler left en on the vga's, is for breading room :
I didn't close the cover good, it's not that it has a space between it lol.
The parts have now there first primer coating :
And here the first parts in primer, i sprayed it very thick,
because i nedd to get al the tiny flows sanded out of it, but will get more layers :
primed en sanded, nog putting on the first layer of MAT black paint, only the pics sucks lol :
And if i whant some HDD SSD sata, then i can put here also two in it for in raid or so :
And in this bay comes a slot-in dvd drive, and then a front plate just with a narrow split for putting dvd in :http://www.youtube.com/watch?v=A0RWZ514aoQ
putting the isolation on the backplates of mobo, with the inox backplates :
And this is how the case is on this moment, also fitted a 16x2 red/black lcd above the Boreas chiller.
Also you see now how hidden the ATX24pin really is, pure cable management with the 90° connectors :
Total overview of the case how he's now.
Most of the cables are on/in it : audio, usb, powerswitch, hdd led, power led, reset, reset led, debug lcd, 2 sata, all atx and pci kabels.
Evga PSU is also on his place together with the dual bay psu in front :
overview of mobo with all cables on it :
Also i have made a cable for the EVbot connection in the mobo IO-Shield, so the connection will be in the front plate, where it's easier to acces to hook up the EVbot :
Total overview of the current cables in the case lols,
but they are not all the cables yet, and need also some controllers to put there
(coolit, koolance, poweruse) :
New Armaflex lasercutted is in, and fits the SR-2 with waterblock perfectly :
Here are some pics with all coolers on there place, now you see also why i make the 90° connectors on the mobo :
Here you see, with fittings and all, i calculated just enough space for cpu block etc :
and this is why i made those 90° connectors, so maximum on cable management :
next layer of armaflex :
Cut-out for the waterblock :
And also soldering some SMD-led's for in the case,
when you solder these smd-led's be shure you use Kynar whire, THE wire for working with SMD's :
And putting the smd-led's on place with double component epoxy :
Just like i put 320 smd-led's in previous casemod : Chiller's Evga Monsta :
I cut up an Evga ECP Panel for building it in the front of my case.
little soldering, and i will have a EVbot connecting in front, a DEBUG lcd, Clear CMOS switch and switches for disable PciE and cpu's.
This will be build in a Lian-Li slim-drive Bracket where together with a slot-in dvd drive also can go two SSD harddrives in it :
i cut the ECP Panel up because you see always mods with just the ECP Panel screwed in the case, now i change this to my own taste.
Here is the Lain-Li slim dvd drive bracket
(bought in usa)
Here you see how i build in all the different switches, lcd en connectors, these will come behind a grey smoke acryl plate :
Clear CMOS with his tiny hole :
Total overview of the case :
In the case it's still dark, but also on the graphics cards will come nice mods etc......:http://www.youtube.com/watch?v=szo-xs4Nkys
little update for tonight,
the Evga ECP Panel of Classified mobo's, i cut it in pieces,
And this is what i did with those pieces, i only whanted to use the Clear CMOS button and the debug lcd,
also i enlarged the connectors in the IO-Shield of the Evga EVbot to the front plate for easy acces.
There still needs to come a slim dvd drive slot-in and a grey smoke front plate :